--- /dev/null
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+# name = value
+#
+# (The "=" is optional.) Whitespace may be used. Comments are introduced with
+# "#" anywhere on a line. The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal. If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload". Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on". Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units: kB = kilobytes Time units: ms = milliseconds
+# MB = megabytes s = seconds
+# GB = gigabytes min = minutes
+# h = hours
+# d = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+data_directory = '/var/lib/postgresql/9.0/main' # use data in another directory
+ # (change requires restart)
+hba_file = '/etc/postgresql/9.0/main/pg_hba.conf' # host-based authentication file
+ # (change requires restart)
+ident_file = '/etc/postgresql/9.0/main/pg_ident.conf' # ident configuration file
+ # (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+external_pid_file = '/var/run/postgresql/9.0-main.pid' # write an extra PID file
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+listen_addresses = '*' # what IP address(es) to listen on;
+ # comma-separated list of addresses;
+ # defaults to 'localhost', '*' = all
+ # (change requires restart)
+port = 5432 # (change requires restart)
+max_connections = 100 # (change requires restart)
+# Note: Increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3 # (change requires restart)
+unix_socket_directory = '/var/run/postgresql' # (change requires restart)
+#unix_socket_group = '' # (change requires restart)
+#unix_socket_permissions = 0777 # begin with 0 to use octal notation
+ # (change requires restart)
+#bonjour = off # advertise server via Bonjour
+ # (change requires restart)
+#bonjour_name = '' # defaults to the computer name
+ # (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min # 1s-600s
+ssl = true # (change requires restart)
+#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' # allowed SSL ciphers
+ # (change requires restart)
+#ssl_renegotiation_limit = 512MB # amount of data between renegotiations
+#password_encryption = on
+#db_user_namespace = off
+
+# Kerberos and GSSAPI
+#krb_server_keyfile = ''
+#krb_srvname = 'postgres' # (Kerberos only)
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_count = 0 # TCP_KEEPCNT;
+ # 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 32MB # min 128kB
+ # (change requires restart)
+#temp_buffers = 8MB # min 800kB
+#max_prepared_transactions = 0 # zero disables the feature
+ # (change requires restart)
+# Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+work_mem = 256MB # min 64kB
+#maintenance_work_mem = 16MB # min 1MB
+#max_stack_depth = 2MB # min 100kB
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000 # min 25
+ # (change requires restart)
+#shared_preload_libraries = '' # (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0ms # 0-100 milliseconds
+#vacuum_cost_page_hit = 1 # 0-10000 credits
+#vacuum_cost_page_miss = 10 # 0-10000 credits
+#vacuum_cost_page_dirty = 20 # 0-10000 credits
+#vacuum_cost_limit = 200 # 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms # 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1 # 1-1000. 0 disables prefetching
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal # minimal, archive, or hot_standby
+ # (change requires restart)
+#fsync = on # turns forced synchronization on or off
+#synchronous_commit = on # immediate fsync at commit
+#wal_sync_method = fsync # the default is the first option
+ # supported by the operating system:
+ # open_datasync
+ # fdatasync (default on Linux)
+ # fsync
+ # fsync_writethrough
+ # open_sync
+#full_page_writes = on # recover from partial page writes
+#wal_buffers = 64kB # min 32kB
+ # (change requires restart)
+#wal_writer_delay = 200ms # 1-10000 milliseconds
+
+#commit_delay = 0 # range 0-100000, in microseconds
+#commit_siblings = 5 # range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 5min # range 30s-1h
+#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s # 0 disables
+
+# - Archiving -
+
+#archive_mode = off # allows archiving to be done
+ # (change requires restart)
+#archive_command = '' # command to use to archive a logfile segment
+#archive_timeout = 0 # force a logfile segment switch after this
+ # number of seconds; 0 disables
+
+# - Streaming Replication -
+
+#max_wal_senders = 0 # max number of walsender processes
+ # (change requires restart)
+#wal_sender_delay = 200ms # walsender cycle time, 1-10000 milliseconds
+#wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables
+#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
+
+# - Standby Servers -
+
+#hot_standby = off # "on" allows queries during recovery
+ # (change requires restart)
+#max_standby_archive_delay = 30s # max delay before canceling queries
+ # when reading WAL from archive;
+ # -1 allows indefinite delay
+#max_standby_streaming_delay = 30s # max delay before canceling queries
+ # when reading streaming WAL;
+ # -1 allows indefinite delay
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0 # measured on an arbitrary scale
+random_page_cost = 2.0 # same scale as above
+#cpu_tuple_cost = 0.01 # same scale as above
+#cpu_index_tuple_cost = 0.005 # same scale as above
+#cpu_operator_cost = 0.0025 # same scale as above
+#effective_cache_size = 128MB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5 # range 1-10
+#geqo_pool_size = 0 # selects default based on effort
+#geqo_generations = 0 # selects default based on effort
+#geqo_selection_bias = 2.0 # range 1.5-2.0
+#geqo_seed = 0.0 # range 0.0-1.0
+
+# - Other Planner Options -
+
+default_statistics_target = 110 # range 1-10000
+#constraint_exclusion = partition # on, off, or partition
+#cursor_tuple_fraction = 0.1 # range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8 # 1 disables collapsing of explicit
+ # JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+log_destination = 'syslog' # Valid values are combinations of
+ # stderr, csvlog, syslog, and eventlog,
+ # depending on platform. csvlog
+ # requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off # Enable capturing of stderr and csvlog
+ # into log files. Required to be on for
+ # csvlogs.
+ # (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log' # directory where log files are written,
+ # can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
+ # can include strftime() escapes
+#log_truncate_on_rotation = off # If on, an existing log file of the
+ # same name as the new log file will be
+ # truncated rather than appended to.
+ # But such truncation only occurs on
+ # time-driven rotation, not on restarts
+ # or size-driven rotation. Default is
+ # off, meaning append to existing files
+ # in all cases.
+#log_rotation_age = 1d # Automatic rotation of logfiles will
+ # happen after that time. 0 disables.
+#log_rotation_size = 10MB # Automatic rotation of logfiles will
+ # happen after that much log output.
+ # 0 disables.
+
+# These are relevant when logging to syslog:
+syslog_facility = 'LOCAL3'
+syslog_ident = 'postgres'
+
+#silent_mode = off # Run server silently.
+ # DO NOT USE without syslog or
+ # logging_collector
+ # (change requires restart)
+
+
+# - When to Log -
+
+#client_min_messages = notice # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # log
+ # notice
+ # warning
+ # error
+
+#log_min_messages = warning # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic
+
+#log_min_error_statement = error # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic (effectively off)
+
+#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
+ # and their durations, > 0 logs only
+ # statements running at least this number
+ # of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default # terse, default, or verbose messages
+#log_hostname = off
+log_line_prefix = '%t ' # special values:
+ # %a = application name
+ # %u = user name
+ # %d = database name
+ # %r = remote host and port
+ # %h = remote host
+ # %p = process ID
+ # %t = timestamp without milliseconds
+ # %m = timestamp with milliseconds
+ # %i = command tag
+ # %e = SQL state
+ # %c = session ID
+ # %l = session line number
+ # %s = session start timestamp
+ # %v = virtual transaction ID
+ # %x = transaction ID (0 if none)
+ # %q = stop here in non-session
+ # processes
+ # %% = '%'
+ # e.g. '<%u%%%d> '
+#log_lock_waits = off # log lock waits >= deadlock_timeout
+#log_statement = 'none' # none, ddl, mod, all
+#log_temp_files = -1 # log temporary files equal or larger
+ # than the specified size in kilobytes;
+ # -1 disables, 0 logs all temp files
+#log_timezone = unknown # actually, defaults to TZ environment
+ # setting
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_functions = none # none, pl, all
+#track_activity_query_size = 1024 # (change requires restart)
+#update_process_title = on
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on # Enable autovacuum subprocess? 'on'
+ # requires track_counts to also be on.
+#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
+ # their durations, > 0 logs only
+ # actions running at least this number
+ # of milliseconds.
+#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
+ # (change requires restart)
+#autovacuum_naptime = 1min # time between autovacuum runs
+#autovacuum_vacuum_threshold = 50 # min number of row updates before
+ # vacuum
+#autovacuum_analyze_threshold = 50 # min number of row updates before
+ # analyze
+#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
+ # (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for
+ # autovacuum, in milliseconds;
+ # -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
+ # autovacuum, -1 means use
+ # vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user",public' # schema names
+#default_tablespace = '' # a tablespace name, '' uses the default
+#temp_tablespaces = '' # a list of tablespace names, '' uses
+ # only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#session_replication_role = 'origin'
+#statement_timeout = 0 # in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#bytea_output = 'hex' # hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+#timezone = unknown # actually, defaults to TZ environment
+ # setting
+#timezone_abbreviations = 'Default' # Select the set of available time zone
+ # abbreviations. Currently, there are
+ # Default
+ # Australia
+ # India
+ # You can create your own file in
+ # share/timezonesets/.
+#extra_float_digits = 0 # min -15, max 3
+#client_encoding = sql_ascii # actually, defaults to database
+ # encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8' # locale for system error message
+ # strings
+lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
+lc_numeric = 'en_US.UTF-8' # locale for number formatting
+lc_time = 'en_US.UTF-8' # locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+# Note: Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding # on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#sql_inheritance = on
+#standard_conforming_strings = off
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+#custom_variable_classes = '' # list of custom variable class names
# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.
-data_directory = '/var/lib/postgresql/9.0/main' # use data in another directory
+data_directory = '/var/lib/postgresql/9.1/main' # use data in another directory
# (change requires restart)
-hba_file = '/etc/postgresql/9.0/main/pg_hba.conf' # host-based authentication file
+hba_file = '/etc/postgresql/9.1/main/pg_hba.conf' # host-based authentication file
# (change requires restart)
-ident_file = '/etc/postgresql/9.0/main/pg_ident.conf' # ident configuration file
+ident_file = '/etc/postgresql/9.1/main/pg_ident.conf' # ident configuration file
# (change requires restart)
# If external_pid_file is not explicitly set, no extra PID file is written.
-external_pid_file = '/var/run/postgresql/9.0-main.pid' # write an extra PID file
+external_pid_file = '/var/run/postgresql/9.1-main.pid' # write an extra PID file
# (change requires restart)
# defaults to 'localhost', '*' = all
# (change requires restart)
port = 5432 # (change requires restart)
-max_connections = 100 # (change requires restart)
-# Note: Increasing max_connections costs ~400 bytes of shared memory per
+#max_connections = 100 # (change requires restart)
+# Note: Increasing max_connections costs ~400 bytes of shared memory per
# connection slot, plus lock space (see max_locks_per_transaction).
#superuser_reserved_connections = 3 # (change requires restart)
unix_socket_directory = '/var/run/postgresql' # (change requires restart)
# - Memory -
-shared_buffers = 32MB # min 128kB
+#shared_buffers = 32MB # min 128kB
# (change requires restart)
#temp_buffers = 8MB # min 800kB
#max_prepared_transactions = 0 # zero disables the feature
# per transaction slot, plus lock space (see max_locks_per_transaction).
# It is not advisable to set max_prepared_transactions nonzero unless you
# actively intend to use prepared transactions.
-work_mem = 256MB # min 64kB
+#work_mem = 1MB # min 64kB
#maintenance_work_mem = 16MB # min 1MB
#max_stack_depth = 2MB # min 100kB
# - Settings -
-#wal_level = minimal # minimal, archive, or hot_standby
+wal_level = archive # minimal, archive, or hot_standby
# (change requires restart)
#fsync = on # turns forced synchronization on or off
-#synchronous_commit = on # immediate fsync at commit
-#wal_sync_method = fsync # the default is the first option
+#synchronous_commit = on # synchronization level; on, off, or local
+#wal_sync_method = fsync # the default is the first option
# supported by the operating system:
# open_datasync
# fdatasync (default on Linux)
# fsync_writethrough
# open_sync
#full_page_writes = on # recover from partial page writes
-#wal_buffers = 64kB # min 32kB
+#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
# (change requires restart)
#wal_writer_delay = 200ms # 1-10000 milliseconds
# - Archiving -
-#archive_mode = off # allows archiving to be done
+archive_mode = on # allows archiving to be done
# (change requires restart)
-#archive_command = '' # command to use to archive a logfile segment
+archive_command = '/home/postgres/eg/eg-wal-archive.sh %p %f' # command to use to archive a logfile segment
#archive_timeout = 0 # force a logfile segment switch after this
# number of seconds; 0 disables
-# - Streaming Replication -
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Master Server -
+
+# These settings are ignored on a standby server
#max_wal_senders = 0 # max number of walsender processes
# (change requires restart)
-#wal_sender_delay = 200ms # walsender cycle time, 1-10000 milliseconds
+#wal_sender_delay = 1s # walsender cycle time, 1-10000 milliseconds
#wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables
#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
+#replication_timeout = 60s # in milliseconds; 0 disables
+#synchronous_standby_names = '' # standby servers that provide sync rep
+ # comma-separated list of application_name
+ # from standby(s); '*' = all
# - Standby Servers -
+# These settings are ignored on a master server
+
#hot_standby = off # "on" allows queries during recovery
# (change requires restart)
#max_standby_archive_delay = 30s # max delay before canceling queries
#max_standby_streaming_delay = 30s # max delay before canceling queries
# when reading streaming WAL;
# -1 allows indefinite delay
+#wal_receiver_status_interval = 10s # send replies at least this often
+ # 0 disables
+#hot_standby_feedback = off # send info from standby to prevent
+ # query conflicts
#------------------------------------------------------------------------------
# - Other Planner Options -
-default_statistics_target = 110 # range 1-10000
+#default_statistics_target = 100 # range 1-10000
#constraint_exclusion = partition # on, off, or partition
#cursor_tuple_fraction = 0.1 # range 0.0-1.0
#from_collapse_limit = 8
-#join_collapse_limit = 8 # 1 disables collapsing of explicit
+#join_collapse_limit = 8 # 1 disables collapsing of explicit
# JOIN clauses
# can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
# can include strftime() escapes
-#log_truncate_on_rotation = off # If on, an existing log file of the
+#log_file_mode = 0600 # creation mode for log files,
+ # begin with 0 to use octal notation
+#log_truncate_on_rotation = off # If on, an existing log file with the
# same name as the new log file will be
# truncated rather than appended to.
# But such truncation only occurs on
# in all cases.
#log_rotation_age = 1d # Automatic rotation of logfiles will
# happen after that time. 0 disables.
-#log_rotation_size = 10MB # Automatic rotation of logfiles will
+#log_rotation_size = 10MB # Automatic rotation of logfiles will
# happen after that much log output.
# 0 disables.
# fatal
# panic (effectively off)
-#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
+log_min_duration_statement = 1000 # -1 is disabled, 0 logs all statements
# and their durations, > 0 logs only
# statements running at least this number
# of milliseconds
#log_temp_files = -1 # log temporary files equal or larger
# than the specified size in kilobytes;
# -1 disables, 0 logs all temp files
-#log_timezone = unknown # actually, defaults to TZ environment
- # setting
+#log_timezone = '(defaults to server environment setting)'
#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------
-#autovacuum = on # Enable autovacuum subprocess? 'on'
+#autovacuum = on # Enable autovacuum subprocess? 'on'
# requires track_counts to also be on.
#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
# their durations, > 0 logs only
#autovacuum_naptime = 1min # time between autovacuum runs
#autovacuum_vacuum_threshold = 50 # min number of row updates before
# vacuum
-#autovacuum_analyze_threshold = 50 # min number of row updates before
+#autovacuum_analyze_threshold = 50 # min number of row updates before
# analyze
#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
+#default_transaction_deferrable = off
#session_replication_role = 'origin'
#statement_timeout = 0 # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
datestyle = 'iso, mdy'
#intervalstyle = 'postgres'
-#timezone = unknown # actually, defaults to TZ environment
- # setting
+#timezone = '(defaults to server environment setting)'
#timezone_abbreviations = 'Default' # Select the set of available time zone
# abbreviations. Currently, there are
# Default
# Note: Each lock table slot uses ~270 bytes of shared memory, and there are
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
# lock table slots.
-
+#max_pred_locks_per_transaction = 64 # min 10
+ # (change requires restart)
#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#default_with_oids = off
#escape_string_warning = on
#lo_compat_privileges = off
+#quote_all_identifiers = off
#sql_inheritance = on
-#standard_conforming_strings = off
+#standard_conforming_strings = on
#synchronize_seqscans = on
# - Other Platforms and Clients -
#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off # terminate session on any error?
+#restart_after_crash = on # reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------
#custom_variable_classes = '' # list of custom variable class names
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+#custom_variable_classes = '' # list of custom variable class names
+default_statistics_target = 100 # pgtune wizard 2011-04-13
+maintenance_work_mem = 1GB # pgtune wizard 2011-04-13
+constraint_exclusion = on # pgtune wizard 2011-04-13
+checkpoint_completion_target = 0.9 # pgtune wizard 2011-04-13
+effective_cache_size = 88GB # pgtune wizard 2011-04-13
+work_mem = 256MB # pgtune wizard 2011-04-13
+wal_buffers = 8MB # pgtune wizard 2011-04-13
+checkpoint_segments = 64 # pgtune wizard 2011-04-13
+shared_buffers = 8GB # pgtune wizard 2011-04-13
+max_connections = 1000 # pgtune wizard 2011-04-13
+
projects / contrib / pines / genasys.git / commitdiff