-Evergreen doesn't keep a GNU-style ChangeLog except in release tarballs.
-Those seeking a change log are encouraged to run 'git log -v', or read
-it online at: http://git.evergreen-ils.org/?p=Evergreen.git;a=log
+commit 37584a48b43f4d97decf933ebfd1377a5efee06d
+Author: Bill Erickson <berick@esilibrary.com>
+Date: Thu May 16 11:20:17 2013 -0400
+
+ Bumping OpenILS.pm VERSION to 2.0307
+
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+
+1 1 Open-ILS/src/perlmods/lib/OpenILS.pm
+
+commit 97e4cb9c7f5da0cc7ce8c71973e149201f55ede2
+Author: Bill Erickson <berick@esilibrary.com>
+Date: Wed May 15 16:09:22 2013 -0400
+
+ 2.3.7 Translations Newpot
+
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+
+2 4 build/i18n/po/XULTermLoader.js/XULTermLoader.js.pot
+10 30 build/i18n/po/acq.js/acq.js.pot
+2 4 build/i18n/po/capture.js/capture.js.pot
+7 19 build/i18n/po/conify.js/conify.js.pot
+6 6 build/i18n/po/db.seed/db.seed.pot
+1048 1048 build/i18n/po/fm_IDL.dtd/fm_IDL.dtd.pot
+44 104 build/i18n/po/ils_events.xml/ils_events.xml.pot
+4 11 build/i18n/po/opac.js/opac.js.pot
+10 11 build/i18n/po/register.js/register.js.pot
+2 5 build/i18n/po/reservation.js/reservation.js.pot
+3 8 build/i18n/po/selfcheck.js/selfcheck.js.pot
+
+commit 7f02b351f7ab9667b789041547182ead0ef1d47e
+Author: Bill Erickson <berick@esilibrary.com>
+Date: Wed May 15 16:04:07 2013 -0400
+
+ 2.3.7 Translations Import
+
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+
+5 5 build/i18n/po/cat.properties/en-GB.po
+6 4 build/i18n/po/circ.properties/cs-CZ.po
+17 13 build/i18n/po/circ.properties/en-GB.po
+6 4 build/i18n/po/circ.properties/hy-AM.po
+8 8 build/i18n/po/conify.js/cs-CZ.po
+9 9 build/i18n/po/conify.js/en-GB.po
+8 8 build/i18n/po/conify.js/hy-AM.po
+4 4 build/i18n/po/db.seed/cs-CZ.po
+8 8 build/i18n/po/db.seed/en-GB.po
+5 5 build/i18n/po/db.seed/hy-AM.po
+32 32 build/i18n/po/fm_IDL.dtd/cs-CZ.po
+6 6 build/i18n/po/fm_IDL.dtd/en-GB.po
+24 24 build/i18n/po/fm_IDL.dtd/hy-AM.po
+7 4 build/i18n/po/ils_events.xml/cs-CZ.po
+18 11 build/i18n/po/ils_events.xml/en-GB.po
+7 4 build/i18n/po/ils_events.xml/hy-AM.po
+41 41 build/i18n/po/lang.dtd/cs-CZ.po
+8 5 build/i18n/po/lang.dtd/en-GB.po
+42 42 build/i18n/po/lang.dtd/hy-AM.po
+4 4 build/i18n/po/offline.properties/cs-CZ.po
+17 17 build/i18n/po/offline.properties/en-GB.po
+4 4 build/i18n/po/offline.properties/hy-AM.po
+16 4 build/i18n/po/opac.dtd/en-GB.po
+7 7 build/i18n/po/patron.properties/en-GB.po
+4 4 build/i18n/po/patron.properties/hy-AM.po
+5 5 build/i18n/po/reservation.js/en-GB.po
+6 6 build/i18n/po/serial.properties/cs-CZ.po
+7 7 build/i18n/po/serial.properties/en-GB.po
+6 6 build/i18n/po/serial.properties/hy-AM.po
+
+commit 7fd240bf4a9d3baf15c7cb012191dda53808e059
+Author: Dan Wells <dbw2@calvin.edu>
+Date: Wed Apr 3 15:30:40 2013 -0400
+
+ stamping upgrade for field 264 reporter view
+
+ Signed-off-by: Dan Wells <dbw2@calvin.edu>
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+1 1 Open-ILS/src/sql/Pg/002.schema.config.sql
+37 0 Open-ILS/src/sql/Pg/upgrade/0788.schema.reporter_264_pubinfo.sql
+0 37 Open-ILS/src/sql/Pg/upgrade/XXXX.schema.reporter_264_pubinfo.sql
+ create mode 100644 Open-ILS/src/sql/Pg/upgrade/0788.schema.reporter_264_pubinfo.sql
+ delete mode 100644 Open-ILS/src/sql/Pg/upgrade/XXXX.schema.reporter_264_pubinfo.sql
+
+commit 82f568b6172108bd4338e6dacad16e403677dce4
+Author: Ben Shum <bshum@biblio.org>
+Date: Thu Jan 31 12:20:20 2013 -0500
+
+ LP1071505 - Add 264 RDA tag to reporter views
+
+ Some reports draw from reporter.materialized_simple_record table and these
+ were not made aware of the new 264 tag which contains publisher related
+ information.
+
+ Change the view for reporter.old_super_simple_record, which feeds into the
+ other reporter table.
+
+ The included upgrade SQL will update this view and then update the table using
+ the new view.
+
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+ Signed-off-by: Dan Wells <dbw2@calvin.edu>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+2 2 Open-ILS/src/sql/Pg/reporter-schema.sql
+37 0 Open-ILS/src/sql/Pg/upgrade/XXXX.schema.reporter_264_pubinfo.sql
+ create mode 100644 Open-ILS/src/sql/Pg/upgrade/XXXX.schema.reporter_264_pubinfo.sql
+
+commit 462034eb81267dc0d66980e7fd26ecff41462c54
+Author: Ben Shum <bshum@biblio.org>
+Date: Wed Oct 10 17:00:54 2012 -0400
+
+ LP1071505 - Add 264 RDA tag to TPAC pubinfo display
+
+ Prior to this, TPAC only retrieved the 260 tag for publication info. Allow for
+ the possibility that the 264 tag might exist and contain relevant information.
+ Special note: the 264 tag must have a second indicator value of 1 to be meant
+ for publication statement.
+
+ Also, this only picks out the first 260 or 264 tags in any given bib record.
+
+ Approach inspired by Dan Scott's approach taken for finding edition statements.
+
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+ Signed-off-by: Dan Wells <dbw2@calvin.edu>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+9 3 Open-ILS/src/templates/opac/parts/misc_util.tt2
+
+commit 9285aa2e9851bc7f3ce3a6c5e646a62f8bb4b56f
+Author: Mike Rylander <mrylander@gmail.com>
+Date: Fri Apr 19 16:14:13 2013 -0400
+
+ Correct subfield format for authority lookup
+
+ The Authority Control Set code expects the format of subfields
+ that it will be used to build a MARC.Field object to be of the
+ form: [[code,value],...] This commit makes that true.
+
+ Additionally, dojo.filter over a list of lists can cause the
+ nested array set to be flattened. So, instead, we loop directly.
+
+ Signed-off-by: Mike Rylander <mrylander@gmail.com>
+
+10 5 Open-ILS/web/js/dojo/openils/AuthorityControlSet.js
+1 2 Open-ILS/xul/staff_client/server/cat/marcedit.js
+
+commit e5a34ea91940325f90a5457efc81416856e10bf3
+Author: Bill Erickson <berick@esilibrary.com>
+Date: Thu May 16 09:11:50 2013 -0400
+
+ Repair faulty MARC editor authority validation
+
+ Repair how the JS inspects the results of
+ open-ils.search.authority.simple_heading.from_xml.batch.atomic, which is
+ used to look up matches for authority validation. It returns a more
+ complex structure in the brave new world of authority control sets.
+
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+ Signed-off-by: Mike Rylander <mrylander@gmail.com>
+
+19 2 Open-ILS/xul/staff_client/server/cat/marcedit.js
+
+commit 5796d8f44259aeef257ac60b16b159db7207e989
+Author: Mike Rylander <mrylander@gmail.com>
+Date: Tue Apr 30 11:26:00 2013 -0400
+
+ Make sure the "running" indicator goes away
+
+ Signed-off-by: Mike Rylander <mrylander@gmail.com>
+ Signed-off-by: Jason Etheridge <jason@esilibrary.com>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+8 1 Open-ILS/src/perlmods/lib/OpenILS/Application/Search/Biblio.pm
+
+commit 2ffbec542f5b63d83906450d965725a2d08321c4
+Author: Mike Rylander <mrylander@gmail.com>
+Date: Fri Apr 26 11:28:38 2013 -0400
+
+ Add a $cache_timeout-based backstop for infinite loops
+
+ Signed-off-by: Mike Rylander <mrylander@gmail.com>
+ Signed-off-by: Jason Etheridge <jason@esilibrary.com>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+2 1 Open-ILS/src/perlmods/lib/OpenILS/Application/Search/Biblio.pm
+
+commit c2916457e6a2a56543e9ebd4b36da9cde6400774
+Author: Mike Rylander <mrylander@gmail.com>
+Date: Fri Apr 26 10:49:17 2013 -0400
+
+ "Queue Compression" -- let one do the work for all identical, concurrent searches
+
+ Signed-off-by: Mike Rylander <mrylander@gmail.com>
+ Signed-off-by: Jason Etheridge <jason@esilibrary.com>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+17 0 Open-ILS/src/perlmods/lib/OpenILS/Application/Search/Biblio.pm
+
+commit 870874173ec34ac51af442564210edf6acb6e077
+Author: Dan Scott <dscott@laurentian.ca>
+Date: Tue Jan 29 11:04:33 2013 -0500
+
+ Apply all 2.2 upgrades prior to running 2.3.0 upgrade
+
+ If users are expected to run all of the 2.2 upgrade scripts, then let's
+ make it easy for them. As PostgreSQL 9.1 does not include the \ir
+ "include relative path" command, we have to pause at the beginning of
+ the upgrade process to ensure that the user is running the script from
+ the right directory.
+
+ Signed-off-by: Dan Scott <dscott@laurentian.ca>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+19 1 Open-ILS/src/sql/Pg/version-upgrade/2.2-2.3.0-upgrade-db.sql
+
+commit 12950b91c3aba93f96807fa450dfbdd9ccee8352
+Author: Ben Shum <bshum@biblio.org>
+Date: Mon May 13 14:19:06 2013 -0400
+
+ LP1179614 - fix Export All Records action
+
+ In the record buckets, the button for 'Export All Records' would work up
+ to the point where you chose where to save the file. After clicking where
+ to save, it would not show any saved files or prompts indicating it completed
+ the export process.
+
+ This fix changes the location of where to find the export tool and properly
+ exports the bibs as the file format selected.
+
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+ Signed-off-by: Galen Charlton <gmc@esilibrary.com>
+
+1 1 Open-ILS/xul/staff_client/server/cat/record_buckets.js
+
+commit 6037151b6fc62bd59535b53d74518eeb123e82f2
+Author: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+Date: Mon May 6 14:15:18 2013 -0400
+
+ Serials: MFHD::get_compressed_holdings() can reach infinite loop
+
+ Even controlled serials holdings involve the internal creation of MFHD
+ fields, upon which caculations are performed for such purposes as the
+ display of holdings summaries in the OPAC.
+
+ There are too many ways that incorrect MFHD (or MFHD that our code just
+ can't yet handle) can lead our MFHD routines to crash. We can't address
+ all these possibilities in a single bug fix. But we can avoid this
+ infinite loop.
+
+ A subroutine within open-ils.serial (_summarize_contents()) relies on
+ MFHD::get_compressed_holdings(). When the latter went into an infinite
+ loop the result would be an open-il.serial drone process consuming CPU
+ time indefinitely and, depending on the data that provoked the loop,
+ potentially writing repeating messages to stderr indefinitely.
+
+ End users will still see the item receiving fail in these cases, and be
+ obliged to work around the issue as before until more robust
+ holdings summarization code can be written, but at least the overall
+ condition of the running Evergreen system won't be affected, and there
+ will be better information in the error logs.
+
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+ Signed-off-by: Remington Steed <rjs7@calvin.edu>
+ Signed-off-by: Dan Wells <dbw2@calvin.edu>
+
+22 5 Open-ILS/src/perlmods/lib/OpenILS/Application/Serial.pm
+15 3 Open-ILS/src/perlmods/lib/OpenILS/Utils/MFHD.pm
+
+commit 3e754bef1bb15fbe4cf963f9c001f36e928fdb7c
+Author: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+Date: Mon May 6 14:13:13 2013 -0400
+
+ Serials: Test method to identify holdings that lead to summarization bugs
+
+ This adds a simple test method that allows testing of problem holdings.
+ See the next commit.
+
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+ Signed-off-by: Remington Steed <rjs7@calvin.edu>
+ Signed-off-by: Dan Wells <dbw2@calvin.edu>
+
+31 0 Open-ILS/src/perlmods/lib/OpenILS/Application/Serial.pm
+
+commit cd28e5108b03df588c1c433a0675ea30be3d6b10
+Author: Mark Cooper <markchristophercooper@gmail.com>
+Date: Mon May 6 12:37:32 2013 -0700
+
+ Exports are broken
+
+ Proposed fix for lp1175816, tested with 2.3.2 / 2.4.0.
+
+ Signed-off-by: Mark Cooper <markchristophercooper@gmail.com>
+ Signed-off-by: Galen Charlton <gmc@esilibrary.com>
+
+2 2 Open-ILS/src/perlmods/lib/OpenILS/WWW/Exporter.pm
+2 2 Open-ILS/src/support-scripts/marc_export.in
+
+commit 3ceea7b3a486ffaf5251c68e3dfe22e974b7916d
+Author: Bill Erickson <berick@esilibrary.com>
+Date: Fri Mar 29 09:41:44 2013 -0400
+
+ LP1076411 Return updated circ object from checkin
+
+ Retrieve an updated copy of the circulation object to return to the
+ caller during checkin. This ensures the data in the circ object, in
+ particular date fields, are consistent with the database.
+
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+
+11 5 Open-ILS/src/perlmods/lib/OpenILS/Application/Circ/Circulate.pm
+
+commit 7d1f52e29c0a1aa84300c13e238ab60a7c47e5b4
+Author: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+Date: Wed Apr 3 15:31:09 2013 -0400
+
+ When adding errors from failed processing to acq.edi_message, set error_time
+
+ This has obvious benefits in facilitating log analysis after a problem.
+
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+
+1 0 Open-ILS/src/perlmods/lib/OpenILS/Application/Acq/EDI.pm
+
+commit fd52eb97427ad38085236a065b21e04aa93b8ad6
+Author: Remington Steed <rjs7@calvin.edu>
+Date: Thu Mar 14 14:37:17 2013 -0400
+
+ Add accepting_usr to IDL to fix reporter field
+
+ In the reporter interface, the view 'Payments: Brick-and-mortar' is
+ missing the 'Accepting User' field, which is present in the similar view
+ 'Payments: Desk'. This field is already present in the database view and
+ is simply missing from the IDL. Since it is needed for certain kinds of
+ reports, this commit adds the missing IDL fields. It also adds the
+ missing 'reporter:datatype' to an existing instance of the IDL field.
+
+ Signed-off-by: Remington Steed <rjs7@calvin.edu>
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+
+3 1 Open-ILS/examples/fm_IDL.xml
+
+commit 030973d2cef443483b4c63b7b745648621216fd8
+Author: Kyle Tomita <ktomita@catalystitservices.com>
+Date: Tue Apr 9 13:51:14 2013 -0700
+
+ LP1104823 - OPAC search results "Limit to available items" toggles
+ off "Show more details"
+
+ Added a hidden input to the form when "Show more details" is selected
+ so that when the form is reloaded, "Show more details" will be still
+ selected.
+
+ Signed-off-by: Kyle Tomita <ktomita@catalystitservices.com>
+ Signed-off-by: Ben Shum <bshum@biblio.org>
+
+3 0 Open-ILS/src/templates/opac/results.tt2
+
+commit 66e9aa3948a392b6fdc0cb33cf977a38514e16df
+Author: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+Date: Wed Feb 20 09:41:03 2013 -0500
+
+ Acq: re-use more code for two ways of creating invoices (EDI and manual)
+
+ This solves two problems.
+
+ 1) With EDI invoices, we had been failing to disencumber fund debits
+ related to the invoiced lineitems, although that worked for manual
+ invoices.
+ 2) With manual invoices, we would not automatically uncancel copies
+ when the user decided to invoice them despite their canceled status.
+ This was already working in EDI invoices though. This is especially
+ important since our schema lumps "backordered" in with "canceled,"
+ and in theory backordered things do show up eventually.
+
+ There were earlier version of this commit out there with bugs that
+ prevented the EDI workflow from working correctly (the manual invoice
+ flow worked and still should).
+
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+ Signed-off-by: Mike Rylander <mrylander@gmail.com>
+
+14 92 Open-ILS/src/perlmods/lib/OpenILS/Application/Acq/EDI.pm
+177 65 Open-ILS/src/perlmods/lib/OpenILS/Application/Acq/Invoice.pm
+
+commit 44684888b39212679bc98cd5472d87195806a150
+Author: Jason Stephenson <jstephenson@mvlc.org>
+Date: Thu Apr 18 10:49:06 2013 -0400
+
+ Minor change to chrome/content/util/list.js.
+
+ Change the initializer of this.count_for_display from 0 to 1 in
+ order to match the counting of other lists in the client and to
+ provide something that staff are likely to prefer.
+
+ Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
+
+1 1 Open-ILS/xul/staff_client/chrome/content/util/list.js
+
+commit 550f773c834cbd1a0d6d12b74994e90737c6dfde
+Author: Dmitry Nechai <nechai.dmitry@gmail.com>
+Date: Wed Apr 17 00:33:57 2013 +0300
+
+ Fixed bug in staff client offline mode.
+
+ https://bugs.launchpad.net/evergreen/+bug/1089657
+
+ In list.js at start you create obj.columns for lineno, but later
+ you don`t process this value so it`s return default render
+ function. This code repairs this.
+
+ Signed-off-by: Dmitry Nechai <nechai.dmitry@gmail.com>
+ Signed-off-by: Jason Stephenson <jstephenson@mvlc.org>
+
+20 4 Open-ILS/xul/staff_client/chrome/content/util/list.js
+
+commit 50af0816fe85c5c71d3b7bfd9cc1b192b07e74c2
+Author: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+Date: Tue Apr 16 22:24:07 2013 -0400
+
+ 2.2.7-2.2.8 database upgrade script
+
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+
+124 0 Open-ILS/src/sql/Pg/version-upgrade/2.2.7-2.2.8-upgrade-db.sql
+ create mode 100644 Open-ILS/src/sql/Pg/version-upgrade/2.2.7-2.2.8-upgrade-db.sql
+
+commit cc9cd07e72b347bf8a7600933474651ed53afbf6
+Author: Bill Erickson <berick@esilibrary.com>
+Date: Wed Apr 17 15:47:59 2013 -0400
+
+ 2.3.5 -> 2.3.6 SQL upgrade
+
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+ Signed-off-by: Lebbeous Fogle-Weekley <lebbeous@esilibrary.com>
+
+124 0 Open-ILS/src/sql/Pg/version-upgrade/2.3.5-2.3.6-upgrade-db.sql
+ create mode 100644 Open-ILS/src/sql/Pg/version-upgrade/2.3.5-2.3.6-upgrade-db.sql
+
+commit 311e538e9ab59f92363c8d1fe28258f1005e1b00
+Author: Dan Scott <dscott@laurentian.ca>
+Date: Fri Apr 5 01:53:55 2013 -0400
+
+ Prevent compiler warning about unused numtype var
+
+ There was a dangling variable left around that was making noise in the
+ compiler. Credit to Jeff Godin for the heads-up.
+
+ Signed-off-by: Dan Scott <dscott@laurentian.ca>
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+
+1 2 Open-ILS/src/c-apps/oils_sql.c
+
+commit b2b0c4603e493e38b79cadae347b756a4d5d90a0
+Author: Mike Rylander <mrylander@gmail.com>
+Date: Fri Apr 5 01:52:16 2013 -0400
+
+ Address SQL injection vulnerability in SQL ORM layer
+
+ If the user-supplied value and the db column are both numbers
+ (jsonObject->type == JSON_NUMBER, get_primitive(field) == "number") then
+ don't quote. Otherwise, quote.
+
+ Signed-off-by: Mike Rylander <mrylander@gmail.com>
+ Signed-off-by: Dan Scott <dscott@laurentian.ca>
+ Signed-off-by: Bill Erickson <berick@esilibrary.com>
+
+4 18 Open-ILS/src/c-apps/oils_sql.c
sub ils_version {
# version format is "x-y-z", for example "2-0-0" for Evergreen 2.0.0
# For branches, format is "x-y"
- return "HEAD";
+ return "2-3-7";
}
__PACKAGE__->register_method(
FOR EACH ROW EXECUTE PROCEDURE evergreen.array_overlap_check ('deprecates');
INSERT INTO config.upgrade_log (version, applied_to) VALUES ('0788', :eg_version); -- bshum/dbwells
+INSERT INTO config.upgrade_log (version, applied_to) VALUES ('2.3.7', :eg_version);
CREATE TABLE config.bib_source (
id SERIAL PRIMARY KEY,
--- /dev/null
+--Upgrade Script for 2.3.6 to 2.3.7
+\set eg_version '''2.3.7'''
+BEGIN;
+INSERT INTO config.upgrade_log (version, applied_to) VALUES ('2.3.7', :eg_version);
+
+SELECT evergreen.upgrade_deps_block_check('0788', :eg_version);
+
+-- New view including 264 as a potential tag for publisher and pubdate
+CREATE OR REPLACE VIEW reporter.old_super_simple_record AS
+SELECT r.id,
+ r.fingerprint,
+ r.quality,
+ r.tcn_source,
+ r.tcn_value,
+ FIRST(title.value) AS title,
+ FIRST(author.value) AS author,
+ ARRAY_TO_STRING(ARRAY_ACCUM( DISTINCT publisher.value), ', ') AS publisher,
+ ARRAY_TO_STRING(ARRAY_ACCUM( DISTINCT SUBSTRING(pubdate.value FROM $$\d+$$) ), ', ') AS pubdate,
+ ARRAY_ACCUM( DISTINCT REPLACE(SUBSTRING(isbn.value FROM $$^\S+$$), '-', '') ) AS isbn,
+ ARRAY_ACCUM( DISTINCT REGEXP_REPLACE(issn.value, E'^\\S*(\\d{4})[-\\s](\\d{3,4}x?)', E'\\1 \\2') ) AS issn
+ FROM biblio.record_entry r
+ LEFT JOIN metabib.full_rec title ON (r.id = title.record AND title.tag = '245' AND title.subfield = 'a')
+ LEFT JOIN metabib.full_rec author ON (r.id = author.record AND author.tag IN ('100','110','111') AND author.subfield = 'a')
+ LEFT JOIN metabib.full_rec publisher ON (r.id = publisher.record AND (publisher.tag = '260' OR (publisher.tag = '264' AND publisher.ind2 = '1')) AND publisher.subfield = 'b')
+ LEFT JOIN metabib.full_rec pubdate ON (r.id = pubdate.record AND (pubdate.tag = '260' OR (pubdate.tag = '264' AND pubdate.ind2 = '1')) AND pubdate.subfield = 'c')
+ LEFT JOIN metabib.full_rec isbn ON (r.id = isbn.record AND isbn.tag IN ('024', '020') AND isbn.subfield IN ('a','z'))
+ LEFT JOIN metabib.full_rec issn ON (r.id = issn.record AND issn.tag = '022' AND issn.subfield = 'a')
+ GROUP BY 1,2,3,4,5;
+
+-- Update reporter.materialized_simple_record with new 264-based values for publisher and pubdate
+DELETE FROM reporter.materialized_simple_record WHERE id IN (
+ SELECT DISTINCT record FROM metabib.full_rec WHERE tag = '264' AND subfield IN ('b', 'c')
+);
+
+INSERT INTO reporter.materialized_simple_record
+ SELECT DISTINCT rossr.* FROM reporter.old_super_simple_record rossr INNER JOIN metabib.full_rec mfr ON mfr.record = rossr.id
+ WHERE mfr.tag = '264' AND mfr.subfield IN ('b', 'c')
+;
+
+COMMIT;
<html><head><script></script></head><body onload="var x = document.getElementById('version'); var version ='/xul/server/'.split(/\//)[2]; if (version == 'server') { version = 'versionless debug build'; } x.appendChild(document.createTextNode(version));">
<h1 style="text-decoration: underline">Evergreen</h1>
<p>Target Server ID: <span id="version"></span></p>
-<p>$HeadURL$</p>
+<p>http://git.evergreen-ils.org/Evergreen.git?h=refs/heads/2_3_7</p>
<h2>What is Evergreen?</h2>
<blockquote>
<p>
pref("open-ils.enable_join_tabs", true);
// We'll use this one to help brand some build information into the client, and rely on subversion keywords
-pref("open-ils.repository.headURL","$HeadURL$");
+pref("open-ils.repository.headURL","http://git.evergreen-ils.org/Evergreen.git?h=refs/heads/2_3_7");
pref("open-ils.repository.author","$Author$");
pref("open-ils.repository.revision","$Revision$");
pref("open-ils.repository.date","$Date$");
; HM NIS Edit Wizard helper defines
; Old versions of makensis don't like this, moved to Makefile
;!define /file PRODUCT_VERSION "client/VERSION"
-!define PRODUCT_TAG "Master"
+!define PRODUCT_TAG "2.3"
!define PRODUCT_INSTALL_TAG "${PRODUCT_TAG}"
!define UI_IMAGESET "beta"
;!define UI_IMAGESET "release"
+++ /dev/null
-docs/installation/server_installation.txt
\ No newline at end of file
--- /dev/null
+Installing the Evergreen server
+===============================
+:toc:
+:numbered:
+
+Preamble: referenced user accounts
+----------------------------------
+
+In subsequent sections, we will refer to a number of different accounts, as
+follows:
+
+ * Linux user accounts:
+ ** The *user* Linux account is the account that you use to log onto the
+ Linux system as a regular user.
+ ** The *root* Linux account is an account that has system administrator
+ privileges. On Debian and Fedora you can switch to this account from
+ your *user* account by issuing the `su -` command and entering the
+ password for the *root* account when prompted. On Ubuntu you can switch
+ to this account from your *user* account using the `sudo su -` command
+ and entering the password for your *user* account when prompted.
+ ** The *opensrf* Linux account is an account that you create when installing
+ OpenSRF. You can switch to this account from the *root* account by
+ issuing the `su - opensrf` command.
+ ** The *postgres* Linux account is created automatically when you install
+ the PostgreSQL database server. You can switch to this account from the
+ *root* account by issuing the `su - postgres` command.
+ * PostgreSQL user accounts:
+ ** The *evergreen* PostgreSQL account is a superuser account that you will
+ create to connect to the PostgreSQL database server.
+ * Evergreen administrator account:
+ ** The *egadmin* Evergreen account is an administrator account for
+ Evergreen that you will use to test connectivity and configure your
+ Evergreen instance.
+
+Preamble: developer instructions
+--------------------------------
+
+[NOTE]
+Skip this section if you are using an official release tarball downloaded
+from http://evergreen-ils.org/downloads
+
+Developers working directly with the source code from the Git repository,
+rather than an official release tarball, must install some extra packages
+and perform one step before they can proceed with the `./configure` step.
+
+As the *root* Linux account, install the following packages:
+
+ * autoconf
+ * automake
+ * libtool
+
+As the *user* Linux account, issue the following command in the Evergreen
+source directory to generate the configure script and Makefiles:
+
+[source, bash]
+------------------------------------------------------------------------------
+autoreconf -i
+------------------------------------------------------------------------------
+
+After running `make install`, developers also need to install the Dojo Toolkit
+set of JavaScript libraries. The appropriate version of Dojo is included
+in Evergreen release tarballs. Developers should install the Dojo 1.3.3
+version of Dojo by issuing the following commands as the *opensrf* Linux
+account:
+
+[source, bash]
+------------------------------------------------------------------------------
+wget http://download.dojotoolkit.org/release-1.3.3/dojo-release-1.3.3.tar.gz
+tar -C /openils/var/web/js -xzf dojo-release-1.3.3.tar.gz
+cp -r /openils/var/web/js/dojo-release-1.3.3/* /openils/var/web/js/dojo/.
+------------------------------------------------------------------------------
+
+Installing prerequisites
+------------------------
+
+Evergreen has a number of prerequisite packages that must be installed
+before you can successfully configure, compile, and install Evergreen.
+
+1. Begin by installing the most recent version of OpenSRF (2.1 or later).
+ You can download OpenSRF releases from http://evergreen-ils.org/opensrf.php
+2. On many distributions, it is necessary to install PostgreSQL 9 from external
+ repositories.
++
+ * On Debian Squeeze, open `/etc/apt/sources.list` in a text editor as the
+ *root* Linux account and add the following line:
++
+[source, bash]
+------------------------------------------------------------------------------
+deb http://backports.debian.org/debian-backports squeeze-backports main contrib
+------------------------------------------------------------------------------
++
+ * On Ubuntu Lucid, you can use a PPA (personal package archive), which are
+ package sources hosted on Launchpad. The one most commonly used by Evergreen
+ Community members is maintained by Martin Pitt, who also maintains the
+ official PostgreSQL packages for Ubuntu. As the *root* Linux account, issue
+ the following commands to add the PPA source:
++
+[source, bash]
+------------------------------------------------------------------------------
+apt-get install python-software-properties
+add-apt-repository ppa:pitti/postgresql
+------------------------------------------------------------------------------
++
+ * Ubuntu Precise comes with PostgreSQL 9, so no additional steps are required.
++
+ * Fedora comes with PostgreSQL 9, so no additional steps are required.
++
+3. On Debian and Ubuntu, run `aptitude update` as the *root* Linux account to
+ retrieve the new packages from the backports repository.
+4. Issue the following commands as the *root* Linux account to install
+ prerequisites using the `Makefile.install` prerequisite installer,
+ substituting `debian-squeeze`, `fedora`, `ubuntu-lucid`, or
+ `ubuntu-precise` for <osname> below:
++
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install <osname>
+------------------------------------------------------------------------------
++
+5. Add the libdbi-libdbd libraries to the system dynamic library path by
+ issuing the following commands as the *root* Linux account:
++
+[NOTE]
+You should skip this step if installing on Ubuntu Precise. The ubuntu-precise
+target uses libdbd-pgsql from packages.
++
+.Debian / Ubuntu Lucid
+[source, bash]
+------------------------------------------------------------------------------
+echo "/usr/local/lib/dbd" > /etc/ld.so.conf.d/eg.conf
+ldconfig
+------------------------------------------------------------------------------
++
+.Fedora
+[source, bash]
+------------------------------------------------------------------------------
+echo "/usr/lib64/dbd" > /etc/ld.so.conf.d/eg.conf
+ldconfig
+------------------------------------------------------------------------------
+
+Configuration and compilation instructions
+------------------------------------------
+
+For the time being, we are still installing everything in the `/openils/`
+directory. From the Evergreen source directory, issue the following commands as
+the *user* Linux account to configure and build Evergreen:
+
+[source, bash]
+------------------------------------------------------------------------------
+./configure --prefix=/openils --sysconfdir=/openils/conf
+make
+------------------------------------------------------------------------------
+
+Installation instructions
+-------------------------
+
+1. Once you have configured and compiled Evergreen, issue the following
+ command as the *root* Linux account to install Evergreen, build the server
+ portion of the staff client, and copy example configuration files to
+ `/openils/conf`.
+ Change the value of the `STAFF_CLIENT_STAMP_ID` variable to match the version
+ of the staff client that you will use to connect to the Evergreen server.
++
+[source, bash]
+------------------------------------------------------------------------------
+make STAFF_CLIENT_STAMP_ID=rel_2_3_7 install
+------------------------------------------------------------------------------
++
+2. The server portion of the staff client expects `http://hostname/xul/server`
+ to resolve. Issue the following commands as the *root* Linux account to
+ create a symbolic link pointing to the `server` subdirectory of the server
+ portion of the staff client that we just built using the staff client ID
+ 'rel_name':
++
+[source, bash]
+------------------------------------------------------------------------------
+cd /openils/var/web/xul
+ln -sf rel_name/server server
+------------------------------------------------------------------------------
+
+Change ownership of the Evergreen files
+---------------------------------------
+
+All files in the `/openils/` directory and subdirectories must be owned by the
+`opensrf` user. Issue the following command as the *root* Linux account to
+change the ownership on the files:
+
+[source, bash]
+------------------------------------------------------------------------------
+chown -R opensrf:opensrf /openils
+------------------------------------------------------------------------------
+
+Configure the Apache Web server
+-------------------------------
+
+1. Use the example configuration files in `Open-ILS/examples/apache/` to
+configure your Web server for the Evergreen catalog, staff client, Web
+services, and administration interfaces. Issue the following commands as the
+*root* Linux account:
++
+.Debian and Ubuntu
+[source,bash]
+------------------------------------------------------------------------------
+cp Open-ILS/examples/apache/eg.conf /etc/apache2/sites-available/
+cp Open-ILS/examples/apache/eg_vhost.conf /etc/apache2/
+cp Open-ILS/examples/apache/startup.pl /etc/apache2/
+# Now set up SSL
+mkdir /etc/apache2/ssl
+cd /etc/apache2/ssl
+------------------------------------------------------------------------------
++
+.Fedora
+[source,bash]
+------------------------------------------------------------------------------
+cp Open-ILS/examples/apache/eg.conf /etc/httpd/conf.d/
+cp Open-ILS/examples/apache/eg_vhost.conf /etc/httpd/
+cp Open-ILS/examples/apache/startup.pl /etc/httpd/
+# Now set up SSL
+mkdir /etc/httpd/ssl
+cd /etc/httpd/ssl
+------------------------------------------------------------------------------
++
+2. The `openssl` command cuts a new SSL key for your Apache server. For a
+production server, you should purchase a signed SSL certificate, but you can
+just use a self-signed certificate and accept the warnings in the staff client
+and browser during testing and development. Create an SSL key for the Apache
+server by issuing the following command as the *root* Linux account:
++
+[source,bash]
+------------------------------------------------------------------------------
+openssl req -new -x509 -days 365 -nodes -out server.crt -keyout server.key
+------------------------------------------------------------------------------
++
+3. As the *root* Linux account, edit the `eg.conf` file that you copied into
+place.
+ a. Replace `Allow from 10.0.0.0/8` with `Allow from all` (to enable
+ access to the offline upload / execute interface from any workstation on
+ any network - note that you must secure this for a production instance)
+ b. (Fedora): Change references from the non-existent `/etc/apache2/` directory
+ to `/etc/httpd/`.
+4. Change the user for the Apache server.
+ * (Debian and Ubuntu): As the *root* Linux account, edit
+ `/etc/apache2/envvars`. Change `export APACHE_RUN_USER=www-data` to
+ `export APACHE_RUN_USER=opensrf`.
+ * (Fedora): As the *root* Linux account , edit `/etc/httpd/conf/httpd.conf`.
+ Change `User apache` to `User opensrf`.
+5. Configure Apache with performance settings appropriate for Evergreen:
+ * (Debian and Ubuntu): As the *root* Linux account, edit
+ `/etc/apache2/apache2.conf`:
+ * (Fedora): As the *root* Linux account, edit `/etc/httpd/conf/httpd.conf`:
+ a. Change `KeepAliveTimeout` to `1`. Higher values reduce the chance of
+ a request timing out unexpectedly, but increase the risk of using up
+ all available Apache child processes.
+ b. 'Optional': Change `MaxKeepAliveRequests` to `100`
+ c. Update the prefork configuration section to suit your environment. The
+ following settings apply to a busy system:
++
+[source,bash]
+------------------------------------------------------------------------------
+<IfModule mpm_prefork_module>
+ StartServers 20
+ MinSpareServers 5
+ MaxSpareServers 15
+ MaxClients 150
+ MaxRequestsPerChild 10000
+</IfModule>
+------------------------------------------------------------------------------
++
+6. (Fedora): As the *root* Linux account, edit the `/etc/httpd/eg_vhost.conf`
+ file to change references from the non-existent `/etc/apache2/` directory
+ to `/etc/httpd/`.
+7. (Debian and Ubuntu): As the *root* Linux account, enable the Evergreen site:
++
+[source,bash]
+------------------------------------------------------------------------------
+a2dissite default # OPTIONAL: disable the default site (the "It Works" page)
+a2ensite eg.conf
+------------------------------------------------------------------------------
+
+Configure OpenSRF for the Evergreen application
+-----------------------------------------------
+There are a number of example OpenSRF configuration files in `/openils/conf/`
+that you can use as a template for your Evergreen installation. Issue the
+following commands as the *opensrf* Linux account:
+
+[source, bash]
+------------------------------------------------------------------------------
+cp -b /openils/conf/opensrf_core.xml.example /openils/conf/opensrf_core.xml
+cp -b /openils/conf/opensrf.xml.example /openils/conf/opensrf.xml
+------------------------------------------------------------------------------
+
+When you installed OpenSRF, you created four Jabber users on two
+separate domains and edited the `opensrf_core.xml` file accordingly. Please
+refer back to the OpenSRF README and, as the *opensrf* Linux account, edit the
+Evergreen version of the `opensrf_core.xml` file using the same Jabber users
+and domains as you used while installing and testing OpenSRF.
+
+[NOTE]
+The `-b` flag tells the `cp` command to create a backup version of the
+destination file. The backup version of the destination file has a tilde (`~`)
+appended to the file name, so if you have forgotten the Jabber users and
+domains, you can retrieve the settings from the backup version of the files.
+
+`eg_db_config.pl`, described in the following section, sets the database
+connection information in `opensrf.xml` for you.
+
+Creating the Evergreen database
+-------------------------------
+
+By default, the `Makefile.install` prerequisite installer does not install
+the PostgreSQL 9 database server required by every Evergreen system;
+for production use, most libraries install the PostgreSQL database server on a
+dedicated machine. You can install the packages required by Debian or Ubuntu Lucid
+on the machine of your choice using the following commands as the *root*
+Linux account:
+
+.(Debian and Ubuntu Lucid) Installing PostgreSQL 9.1 server packages
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install install_pgsql_server_backport_debs_91
+------------------------------------------------------------------------------
+
+.(Ubuntu Precise) Installing PostgreSQL 9.1 server packages
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install install_pgsql_server_debs_91
+------------------------------------------------------------------------------
+
+You can install the packages required by Fedora on the machine of your choice
+using the following commands as the *root* Linux account:
+
+.(Fedora) Installing PostgreSQL server packages
+[source, bash]
+------------------------------------------------------------------------------
+make -f Open-ILS/src/extras/Makefile.install install_fedora_pgsql_server
+postgresql-setup initdb
+------------------------------------------------------------------------------
+
+For a standalone PostgreSQL server, install the following Perl modules as the
+*root* Linux account:
+
+.(Debian / Ubuntu) Installing additional Perl modules on a standalone PostgreSQL 9 server
+[source, bash]
+------------------------------------------------------------------------------
+aptitude install gcc libxml-libxml-perl libxml-libxslt-perl
+cpan Business::ISBN
+cpan JSON::XS
+cpan Library::CallNumber::LC
+cpan MARC::Record
+cpan MARC::File::XML
+cpan UUID::Tiny
+------------------------------------------------------------------------------
+
+.(Fedora) Installing additional Perl modules on a standalone PostgreSQL 9 server
+[source, bash]
+------------------------------------------------------------------------------
+yum install gcc perl-XML-LibXML perl-XML-LibXSLT perl-Business-ISBN
+cpan Library::CallNumber::LC
+cpan MARC::Record
+cpan MARC::File::XML
+cpan UUID::Tiny
+------------------------------------------------------------------------------
+
+You need to create a PostgreSQL superuser to create and access the database.
+Issue the following command as the *postgres* Linux account to create a new
+PostgreSQL superuser named `evergreen`. When prompted, enter the new user's
+password:
+
+[source, bash]
+------------------------------------------------------------------------------
+createuser -s -P evergreen
+------------------------------------------------------------------------------
+
+Once you have created the *evergreen* PostgreSQL account, you also need to
+create the database and schema, and configure your configuration files to point
+at the database server. Issue the following command as the *root* Linux account
+from inside the Evergreen source directory, replacing <user>, <password>,
+<hostname>, <port>, and <dbname> with the appropriate values for your
+PostgreSQL database (where <user> and <password> are for the *evergreen*
+PostgreSQL account you just created), and replace <admin-user> and <admin-pass>
+with the values you want for the *egadmin* Evergreen administrator account:
+
+[source, bash]
+------------------------------------------------------------------------------
+perl Open-ILS/src/support-scripts/eg_db_config.pl --update-config \
+ --service all --create-database --create-schema --create-offline \
+ --user <user> --password <password> --hostname <hostname> --port <port> \
+ --database <dbname> --admin-user <admin-user> --admin-pass <admin-pass>
+------------------------------------------------------------------------------
+
+This creates the database and schema and configures all of the services in
+your `/openils/conf/opensrf.xml` configuration file to point to that database.
+It also creates the configuration files required by the Evergreen `cgi-bin`
+administration scripts, and sets the user name and password for the *egadmin*
+Evergreen administrator account to your requested values.
+
+Creating the database on a remote server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+In a production instance of Evergreen, your PostgreSQL server should be
+installed on a dedicated server.
+
+PostgreSQL 9.1 and later
+^^^^^^^^^^^^^^^^^^^^^^^^
+To create the database instance on a remote database server running PostgreSQL
+9.1 or later, simply use the `--create-database` flag on `eg_db_config.pl`.
+
+For PostgreSQL 9.0
+^^^^^^^^^^^^^^^^^^
+To create the database instance on a remote database server running PostgreSQL
+9.0, you can either:
+
+ * Install the PostgreSQL contrib modules on the machine on which you
+ are installing the Evergreen code, and use the `--create-database`
+ option from that machine, or
+ * Copy the `Open-ILS/src/sql/Pg/create_database.sql` script to your
+ PostgreSQL server and invoke it as the *postgres* Linux account:
++
+[source, bash]
+------------------------------------------------------------------------------
+psql -vdb_name=<dbname> -vcontrib_dir=`pg_config --sharedir`/contrib -f create_database.sql
+------------------------------------------------------------------------------
+
+Then you can issue the `eg_db_config.pl` command as above _without_ the
+`--create-database` argument to create your schema and configure your
+configuration files.
+
+Starting Evergreen
+------------------
+1. As the *root* Linux account, start the `memcached` and `ejabberd` services
+(if they aren't already running):
++
+[source, bash]
+------------------------------------------------------------------------------
+/etc/init.d/ejabberd start
+/etc/init.d/memcached start
+------------------------------------------------------------------------------
++
+2. As the *opensrf* Linux account, start Evergreen. The `-l` flag in the
+following command is only necessary if you want to force Evergreen to treat the
+hostname as `localhost`; if you configured `opensrf.xml` using the real
+hostname of your machine as returned by `perl -ENet::Domain 'print
+Net::Domain::hostfqdn() . "\n";'`, you should not use the `-l` flag.
++
+[source, bash]
+------------------------------------------------------------------------------
+osrf_ctl.sh -l -a start_all
+------------------------------------------------------------------------------
++
+ ** If you receive the error message `bash: osrf_ctl.sh: command not found`,
+ then your environment variable `PATH` does not include the `/openils/bin`
+ directory; this should have been set in the *opensrf* Linux account's
+ `.bashrc` configuration file. To manually set the `PATH` variable, edit the
+ configuration file `~/.bashrc` as the *opensrf* Linux account and add the
+ following line:
++
+[source, bash]
+------------------------------------------------------------------------------
+export PATH=$PATH:/openils/bin
+------------------------------------------------------------------------------
++
+3. As the *opensrf* Linux account, generate the Web files needed by the staff
+ client and catalogue and update the organization unit proximity (you need to do
+ this the first time you start Evergreen, and after that each time you change
+ the library hierarchy in `config.cgi`):
++
+[source, bash]
+------------------------------------------------------------------------------
+autogen.sh -u
+------------------------------------------------------------------------------
++
+4. As the *root* Linux account, restart the Apache Web server:
++
+[source, bash]
+------------------------------------------------------------------------------
+/etc/init.d/apache2 restart
+------------------------------------------------------------------------------
++
+If the Apache Web server was running when you started the OpenSRF services, you
+might not be able to successfully log in to the OPAC or staff client until the
+Apache Web server is restarted.
+
+Testing connections to Evergreen
+--------------------------------
+
+Once you have installed and started Evergreen, test your connection to
+Evergreen via `srfsh`. As the *opensrf* Linux account, issue the following
+commands to start `srfsh` and try to log onto the Evergreen server using the
+*egadmin* Evergreen administrator user name and password that you set using the
+`eg_db_config.pl` command:
+
+[source, bash]
+------------------------------------------------------------------------------
+/openils/bin/srfsh
+srfsh% login <admin-user> <admin-pass>
+------------------------------------------------------------------------------
+
+You should see a result like:
+
+ Received Data: "250bf1518c7527a03249858687714376"
+ ------------------------------------
+ Request Completed Successfully
+ Request Time in seconds: 0.045286
+ ------------------------------------
+
+ Received Data: {
+ "ilsevent":0,
+ "textcode":"SUCCESS",
+ "desc":" ",
+ "pid":21616,
+ "stacktrace":"oils_auth.c:304",
+ "payload":{
+ "authtoken":"e5f9827cc0f93b503a1cc66bee6bdd1a",
+ "authtime":420
+ }
+
+ }
+
+ ------------------------------------
+ Request Completed Successfully
+ Request Time in seconds: 1.336568
+ ------------------------------------
+
+If this does not work, it's time to do some troubleshooting.
+
+ * As the *opensrf* Linux acccount, run the `settings-tester.pl` script to see
+ if it finds any system configuration problems. The script is found at
+ `Open-ILS/src/support-scripts/settings-tester.pl` in the Evergreen source
+ tree.
+ * Follow the steps in the http://evergreen-ils.org/dokuwiki/doku.php?id=troubleshooting:checking_for_errors[troubleshooting guide].
+ * If you have faithfully followed the entire set of installation steps
+ listed here, you are probably extremely close to a working system.
+ Gather your configuration files and log files and contact the
+ http://open-ils.org/listserv.php[Evergreen development mailing list]
+ for assistance before making any drastic changes to your system
+ configuration.
+
+Getting help
+------------
+
+Need help installing or using Evergreen? Join the mailing lists at
+http://evergreen-ils.org/listserv.php or contact us on the Freenode
+IRC network on the #evergreen channel.
+
+License
+-------
+This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
+Unported License. To view a copy of this license, visit
+http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative
+Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.
export PATH=${PATH}:/usr/sbin
AC_PREREQ(2.61)
-AC_INIT(Open-ILS, trunk, open-ils-dev@list.georgialibraries.org)
-AM_INIT_AUTOMAKE([OpenILS], [trunk])
+AC_INIT(Open-ILS, 2.3.7, open-ils-dev@list.georgialibraries.org)
+AM_INIT_AUTOMAKE([OpenILS], [2.3.7])
AC_REVISION($Revision: 0.1 $)
AC_CONFIG_SRCDIR([configure.ac])
AC_PREFIX_DEFAULT([/openils/])
projects / working / Evergreen.git / commitdiff